Manual 02 - Section 01







Non-Residential Solar Information Manual
SECTION 11: Technical Data

11.1 HEAT STORE TECHNICAL DATA

* This test is performed in the factory on every container before enamelling.

11.2 ELECTRIC ELEMENT DETAILS:

11.4 ELECTRIC BOOSTER RECOVERY TIMES

The table below gives the hours required to electrically heat the listed water quantities from cold to 60C, assuming no solar input. (Container losses included.)

.

11.5 WEIGHTS AND PIPE CONNECTION SIZES


                                          2500J         3500J        6500J    
                                                                              

Collector Flow And Return        mm        20             25          32      
Connection                                                                    

Potable Water Connection         mm        32             32          32      

Drain And Fill Connection        mm        20             20          20      

Auxiliary Heating Connection     mm        25             25          32      

Weight Empty                     kg       1050           1650        2300     

Weight Full                      kg       3550           5450        9100     



11.6 STAND ALONE GAS HEATING ONLY

All models can be installed without collectors and used as gas hot water systems only. This provides a flexibility to add collectors at a later stage. Gas heating may be supplied either for the top half of the Heat Store only (as in solar models) or as a heat source to the entire volume of the Heat Store.

11.7 CLOSED CIRCUIT CORROSION INHIBITOR